Tag Archives: multiple

Midiverse Modular Launches Passive Utility Modules and Eurorack Frame

Posted on by

Ohio-based synthesizer builders Midiverse Modular are now shipping passive utility modules and 19in rack mountable frames for the Eurorack ecosystem.

MVM001 – Multiple: MVM001 is a 4HP passive multiple that is suitable for audio or CV. Jack 1 is normalized to jack 5, allowing for a 1×6 or 2×3 configuration.

MVM002 – Switches: MVM002 is a dual bi-directional manual switch in a 4HP module. The switches are conveniently located at the bottom of the module, making hands on control over the routing of your patch right at your fingertips.

MVM003 – Attenuators: MVM003 is a 6HP passive 3-channel attenuator module. The inputs are normalized downward, allowing for a single input signal to be distributed to all 3 attenuator channels.

Available now @ https://reverb.com/shop/midiverse

Questions and inquires: MidiverseTV@gmail.com

Using Instrument Level gear with your Modular (LineAmp from Animodule)

Posted on by

The Animodule Line_Amp has been out for just a little while and its a very small (2hp) module but I am continually finding nice little tricks with this module.

The Line amp is essentially a dual buffered multiple BUT it has a switch on it that when turned on will boost any signal times 3. This is useful for taking line level signals and sending them up to the Modular world audio signal level range.

Additionally what I have discovered is that by sending an output from the LineAmp back to its second input you can boost even further and bring instrument level sources such as an electric guitar or rhodes piano up to Modular levels.

Check the Video out for more info on this great eurorack modular synthesizer module 🙂

Buy one here—  https://www.animodule.com/product/line_amp