Analogue Solutions ships space-saving real analogue monosynth module with SEM-style filter

British ‘boutique’ analogue synthesiser and accessory designer/manufacturer Analogue Solutions is proud to announce availability of its all-new Nyborg-12 — an Oberheim SEM-style 2-Pole 12dB/Octave MULTIMODE FILTER-equipped standalone monophonic synthesiser module with real analogue voice and modulation circuitry

front-flat

An analogue renaissance has ensured that the one-time state-of-the-art sounds of analogue synthesisers have long since become highly sought after again. Why? Well, many musicians realised that the convoluted menu-driven access systems deployed on many ‘modern-day’ digital synthesisers with weaker sounds bathed in built-in effects are no substitute for the hands-on immediacy of having access to a control per function at hand when it comes to speedy sculpting of ear-opening and often powerful electronic sounds suited to a variety of musical genres. With more mainstream recording artists and producers than ever now relying on custom sounds as a result of this rising and renewed interest in analogue (subtractive) synthesis, is it any wonder, then, that yesteryear’s often wonderful-sounding (though not necessarily reliable) analogue classics are rapidly rising in value, pushing them out of reach of many musicians of more meagre means? Meeting this demand head on, more analogue synthesisers than ever before are available today from manufacturers both bigger and smaller. Into this healthy and highly-competitive climate comes Analogue Solutions’ latest analogue offering, the Nyborg-12 SEM synthesiser — so-called on account of its 2-Pole 12dB/Octave MULTIMODE FILTER, the same flexible filter with LP (lowpass), BP (bandpass), HP (high pass), and NOTCH settings that is used on Analogue Solutions’ own Telemark SEM semi-modular synthesiser, similar (though not identical) to Tom Oberheim’s original 1974-vintage SEM (Synthesizer Expander Module®), much sought after itself.

Continue reading

Animodule GATE_MOD Eurorack Modular trigger delay

Let’s face it, couldn’t we ALL use a little more length?

This Tiny (yet powerful) Module allows you to manipulate your gate length and delay your event triggers with ease and minimal impact on your HP.

Take an incoming Signal above ~1.1V (OpAmp Comparators on the Inputs make very forgiving Clock Inputs)
and shrink it down to 5MS or lengthen it up to 5 Seconds.
That Gate will appear at the Gate Out. Continue reading

Synthrotek DS-M Drum Synthesizer Module for Eurorack


the Synthrotek DS-M is an awesome new Drum synth Module for Eurorack.
The DS-M is a full featured drum synth that can emulate virtually any drum sound!

The DS-M (Drum Synth Module) is a complex, modifiable, 100% analog drum synth loosely based on the Coron DS-8 and neatly packaged into an 8hp module.

Continue reading

Synthrotek VCA triple response Dual VCA

The Synthrotek Triple Response Dual VCA uses high quality op amps to give you the sound quality you are looking for in affordable kits and completed units. This VCA has three different response curves per channel: 2 Exponential and 1 Linear. The amplitude of EX2 (switch at right position) can be slightly attenuated via 1 trimmer pot per channel on the PCB. This allows for 3 different curves per channel. EX2 has a slightly more exponential curve than EX1. This VCA operates at 0-5V; a 5V CV input will give you 5V point to point audio output. Use over 5V if you want a super ballsy, loud VCA!
Intended for AC and audio use only (DC coupling will not function properly).
Features include:

– ~5V peak to peak output with a +5 DC CV input

– 2 exponential and 1 linear response per channel

– Channel 2 is normalled to channel 1

– Compact 4HP sized module

– Kits, complete and PCB/panel combos

– High Quality Op Amps

– Module depth: 1 7/8 inches (4.7 cm)

– Max current draw: 1mA on -12V rail, 9mA on +12V rail

 

Buy it HERE 

Here is the live build event where I build the resistor section of the VCA and hold a Q&A during it. It is a quite long video as it was held off the cuff, very laid back.

RYO OptoDist Eurorack Voltage Controlled Distortion VCA Limiter

Optodist webpage

Purchase it Here–>(synth cube links) Assembled Module ,Full Kit unassembled

A compact, easy to use, easy to build and great sounding distortion module which will also work as a VCA if desired.

The Optodist is based on two Advanced Photonix (formerly known as Silonex) optocouplers that gives its characterful overdriven sound and plucky dynamic response to CV, it is equally at home adding a bit of extra crisp to highs and mids or warming up your lows as it is turning a resonant filter into a howling beast or your drums into crushing carnage.

Continue reading

post

Animodule V9a Eurorack CV controlled sequencer and waveshapper

It’s a wonderful bit of kit that takes your waveforms and turns them into sequencing steps and rhythmic patterns!

V9a

Here’s a powerful animal to add to your sequencing arsenal.

Send your CV to the CV In. As the Voltage increases the sequence steps forward. As the voltage decreases the sequence steps back.
Scale and adjust your input voltage to taste with the Onboard Attenuator and Offset.

Control the Output CV with an individual Potentiometer for each step.

When a step changes, a 10MS trigger is sent to it’s corresponding switch. If the latching switch is depressed it allows the trigger to pass to the Trigger Out.

There is a switch per step for slew (portamento/slide).
and a Potentiometer to control the Slew Amount.
There is also an input to allow gated control of when the slew turns on and off which will work in conjunction with the switches.

This module is looking for 0V to +5V. The Offset is 0V to +5V.

To allow for chaining of the V9a and rests, 0V will put you under the sequencer range and +5V will put you over the sequencer range.
When the sequence drops below step 1 or over step 9, 0V will be sent to the CV Out and No Trigger will be sent to the Trig Out.
When step 1 or 9 is activated a trigger will be sent to the Trig buss.

Max Current Draw:
+12V = 40mA
-12V = 11mA

Width: 14HP Depth: 39mm

Visit the Animodule Store HERE!

RF Nomad is a Shortwave radio in Eurorack Form and its awesome!

 

RF Nomad shortwave radio for Eurorack modular

 

New Eurorack manufacturer Evaton Technologies has introduced a very original idea to the eurorack community! This module is a shortwave radio that has CV input for tuning. what does that mean to the synth user? Well for starters it means on the fly happy accidents unexpected timbers and strange sounds galore! This module can also pick up EMI sounds from computers and other electronics.

The RF Nomad adds the squealy, squelchy, noisy, unpredictable vintage sounds of shortwave radio to your modular. But this is no ordinary shortwave; it’s been designed to be extra noisy, extra squealy, extra gritty, and just downright nasty. No built-in output filtering means that a rich spectrum of harmonic content is available on the audio output jack. Audio levels can be driven to distortion. CV control lets you add your own creative spin on sound design.

Hissy interstation audio. Squealy heterodynes. Fading stations. Atmospheric noises. Faint voices in foreign languages from distant broadcast stations. Fire and brimstone. It’s all in there, just like your granddad’s old tabletop shortwave.

But, the RF Nomad adds a twist: The tuning is voltage controlled. Sure, when you were a kid, you discovered you could make spacy noises on Papa’s shortwave by slowly turning the tuning dial. But just how fast could you twist that dial? Faster than an audio-rate LFO? Hardly. Voltage controlled tuning means that the RF Nomad will let you explore sounds you never imagined you could get out of a shortwave receiver.


 

Status: Currently manufacturing the first batch!

Format: Eurorack modular synth format

Function: Voltage-controlled Sideband shortwave receiver.

Dimensions: 8HP width (40.3mm x 128.5mm)

Power: +12V: 9 mA, -12V: -9mA

 

MSRP: $176.00 USD