Category Archives: Synths
Korg MS-20 Mini (with Mods) and iMS20 comparison
Evaton Technologies introduces the MKAdapter Gooseneck solution for Micro Korg synths!
This adapter allows you to use a standard Mic adapter with your MicroKorg Vocoder!
check it out at https://www.evatontechnologies.com/mkadapter.
The really great thing about this is that its such a simple solution and can really save you from accidents that having an extra boom stand on stage could cause.
The MKAdapter™ allows you to use a standard microphone gooseneck directly on your Korg MicroKorg synthesizer vocoder, without needing to set up a separate mic stand.
The MKAdapter is a standard 5/8-27 threaded adapter. It fits the built-in microphone holder socket on the Korg MicroKorg synthesizer/vocoder, that was designed to hold the flexible microphone included with the synth.
Shorten your gig setup time and reduce your touring weight; buy the MKAdapter™ from one of our dealers today!
MKAdapter™ is 100% Made in USA
Synthrotek EKO building and Demo video
I love doing Eurorack kits. They are more affordable than assembled versions. They give you the satisfaction of actually having a hand in the quality of your module. It is simply a load of fun to know that you helped create this new sound source in your set up.
That being said, I have yet to do a video showing how I build the kits and get them up and running so here is a short video showing the latest addition to my Eurorack Modular synth. the Synthrotek EKO
available here
Assembled version here–> https://store.synthrotek.com/EKO_Voltage_Controlled_Echo
Kit version here —> https://store.synthrotek.com/EKO_Voltage_Controlled_Echo_Kit
Product info:
– Rate range: 30-190mS
– 4HP
– Voltage-controlled rate
– Self-oscillating feedback
– Mix control
– Hand-assembled in Portland, Oregon
Enjoy!
An intro to Eurorack modular synthesizers
An introduction to Eurorack Modulars
For sometime now I had been wanting to get myself a Eurorack modular synth but wasn’t fully versed in what I needed to actually make this happen. I was well aware of how one worked (this will be covered later) but not how to actually start without wasting a ton of money. I researched and patrolled forums, spoke to friends that owned modulars and generally took my time to make an educated decision on how to get my first system up and running.
Now I would like to pass some of that knowledge on. This article is intended to clear up some of the foggy entry points to Eurorack and make it a lot easier for people to get the systems they want at an affordable price. Please keep in mind because Eurorack Modulars are indeed fully modular, there is no one correct way to start your modular.
This intro video touches on a few of the topics covered here. I recommend watching it and reading the article as well.
What is a Eurorack Modular and why should I want one?
Eurorack is a modular synthesizer format, think of it like VST is a format for plug ins. Any module in Eurorack format can be placed into a Eurorack case (given you have the space and power allocation) and will work with other modules. These modules range from basic synthesis building blocks such as a Amplifier, mixer, Oscillator, envelope, filter etc. to more function and west coast school methods of synthesis such as Function generators (like the Make noise Maths) Flip flops, comparators, even digital control modules. Continue reading
Animodule Quad Comparator module gives u the business
https://animodule.bigcartel.com/product/quad-comparator
The Quad Comparator is a Logic Module for Eurorack synthesizers.
It’s a simple quad comparator based around the LM339.
It will take your Voltages and turn them into Logic On.
When your signal is higher than the threshold the Gate goes high and the NOT Gate goes low.
When your signal is lower than the threshold the NOT gate goes high and the Gate goes low.
You can set the threshold anywhere from about -10V to +10V.
Input 1 is buffered then normalled to JackSwitches 2-4. So you could send an LFO in to Input 1, set different thresholds for all the inputs and have all the gates/NOT Gates fire at different points from the same LFO.
Width = 8HP , Depth = 29mm
XXX_OR from Animdoule for Eurorack modular
Here is a new Module from Eurorack Module maker Animodule.
This is the Triple Exclusive Or “XXX_OR”
It is essentially a logic module that takes up to 6 inputs and combine them to shape the Analog outputs (3) and Gate outputs (3) into interesting sounds and CV. each input is Buffered to the next along with a slight overdrive so each output can get you more shaping. There are so many ways to use this I am needing to do a few videos. (Ring Mod, FM sourcing, Distortion just to name a few)
These are available NOW!
Arturia V collection 3 inside of Maschine studio (overview / review)
The Arturia V collection has long been one of the highest regarded VA synthesis plug in suites available. Now ion Version three some important updates have been made such as true 64-bit support and an all new Analog Laboratory suite with over 5000 presets in total. Also included is the Spark Vintage drum machines plug in that houses 30 amazing drum synths in one excellently laid out package. Spark includes it’s excellent step sequencer as well.
With the 8 synth models inside of the V collection you are sure to be able to reach just about any timber you can think of. Each of these VST’s are mapped right in side of Maschine and Maschine 2 as evident in the video. This allows easy access to sound sculpting parameters and an intuitive workflow.
